Bohler UTP DUR 600 Hard Facing Electrodes

UTP DUR 600 is universally applicable for cladding on parts of steel, cast steel and high Mn-steel, subject simultaneously to abrasion, impact and compression. Typical application fields are the earth moving and stone treatment industry, e.g. excavator teeth, bucket knives, crusher jaws and cones, mill hammers etc., but also for cutting edges on cold cutting tools. Hardness of the pure weld deposit 56 58 HRC After softannealing 780 820° C / oven approx. 25 HRC After hardening 1000 1050° C / oil approx. 60 HRC 1 layer on high Mn-steel approx. 22 HRC 2 layers on high Mn-steel approx. 40 HRC UTP DUR 600 has excellent welding properties due to a quiet arc, an even flow and a good weld build-up, easy slag removal. Machining of the weld metal possible by grinding.

• Hardness of the pure weld deposit 56 58 HRC
• After softannealing 780 820° C / oven approx. 25 HRC
• After hardening 1000 1050° C / oil approx. 60 HRC
• 1 layer on high Mn-steel approx. 22 HRC
• 2 layers on high Mn-steel approx. 40 HRC