VersaDrive® Impact Reamer - Metric (501030)

Keep the Job Moving when a connection hole is undersized

VersaDrive® Reamers have a patented non-slip, Hex shank suitable for use in any standard 1/2 drill chuck for cordless or pistol drills or used with a VersaDrive® Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.

VersaDrive® reamers are not recommended for use with laser or plasma cut holes. The heat affected holes can be enlarged using the VersaDrive reamer with a slow speed magnet drill.

Product Benefits

• Precision 6-flute design for smooth cutting
• Safer reaming with minimal kickback
• Specially hardened for impact wrench use
• High-grade tool steel for high accuracy and long life
• Goldmax low-friction titanium coating to stop burn-out
• High strength, non-slip shank design Use on Impact or Rotary

Quick Guide

• For fastest performance use on impact wrenches & impact drivers
• Impact driven reamers are not recommended for Flame or Plasma cut holes. Use with a Magnet Drill
• Reamer should be rotating before starting the cut & steady feed pressure should be used through the cut
• For materials thicker than 20mm use of ImpactaMag reamers is recommended